A more detailed description of this category is coming soon.
Yes. Building crossings require many angles to be formed onto the rail. The crossing PointForm tools will produce the acute and obtuse angles needed to create a properly functioning crossing.
Symptoms When a Frog Juicer is activated, the LEDs change color, and the turnouts seem to be functioning perfectly, but then an intermittent short circuit occurs that results in the DCC system shutting down. If the power to the Frog Juicer is disconnected, the DCC system re-activates, and when power to the Frog Juicer is ... Read more
Fast Tracks used to produce PC board ties by stamping them on a large press. This worked well but had some drawbacks we didn't like. One was the rough edge created by the stamping process that had to be cleaned up before use. In 2013 we developed a new method of producing PC board ties ... Read more
PointForm tools are cut from mild steel and are not hardened. We prefer not to harden the Pointform tools to extend the life of the files used on them and keep the tool's cost down. Used properly, they will last for a lifetime of turnouts.
QuickSticks are cut from Baltic birch plywood, specially made in Finland for Fast Tracks.
Adhesives
Drilling Tools
DVD's
Files & Sanding
Frog Helper Soldering Jig
Layout & Marking Tools
NMRA Track Gauges
PointForm Filing Jigs
PointForm/StockAid Boxes
Rail Benders
Saws & Cutting Tools
Soldering Supplies
StockAid Filing Jigs
Tool Kits
Track Cleaning
Ultimation Tools
